ACUFEED Flex Feeding System

The ACUFEED System feeds both the top layer and bottom layer of fabric with perfect synchrony; giving you perfect feeding and stitching whether your sewing a large quilt or a fine piece of fabric. The ACUFEED FLEX Feeding System can be easily attached to the machine when needed and detached when not needed. In addition to the ACUFEED FLEX System, the Janome 8200QCP sports Janome's Superior Plus Feed System which uses a consistent parallel, 7-Piece bottom feeding system for consistent fabric contact at all times. This superior system ensures absolutely perfect feeding and combined with the ACUFEED FLEX System; a quilter's dream has just become a reality.

Automatic Needle Threader

Poor eyesight is no longer problem with this attribute! It’s effortless, pull down the needle threader, place your thread in the hook and in front of the needle, pull back and your needle is threaded!

Easy Set Drop-In Bobbin System with Automatic Thread Take-Up

The Top-Loading Drop-In Bobbin System makes it easy to change the bobbin when you run out. Simply insert your new bobbin and follow the thread through the track to the left of the bobbin. The Janome 8200QCP will automatically bring the bobbin thread up for you instantly so you don't have to! The Cover is clear so you can easily see if you are running out of bobbin thread. Janome's Bobbin System is Jam-Proof so you don't have to worry about your machine jamming if you sew off the edge of your project.

Simple Straight Stitch Plate Conversion and Drop Feed Capability

Included with the Janome 8200QCP is a Straight Stitch Plate which gives you a single round straight stitch hole for the ultimate in precision when straight stitching! To change the plate, simply press down the Needle Plate Release Level and your standard plate will instantly pop up. No Screwdriver Needed! The Straight Stitch Plate can then be installed with a simple "click" and you are ready to sew! Free motion quilting to old fashion darning is easy with the drop-feed system. No hard to use darning plates, just push the drop feed switch over and the feed will drop.

Easy Stitch Selection w/ Groups

To select a stitch simply press the Mode Button to get to the stitch you want! There are 170 Built-In Stitches (up to 9mm wide!) as well as 3 Built-In Alphabets and multiple modes (Utility, Decorative, etc.) built-in, making the possibilities endless! Since the machine is computerized you do not have to set the stitch length and width, the machine will do it automatically for you!

Sew Up to a 9mm Stitch Width

The Janome 8200QCP allows you sew at an incredible 9mm Width (Most Machines Sew at 7mm or Below). All included sewing feet and many stitches built-in are made to sew at 9mm so you are ready to sew wide right out of the box! Want to override the pre-set Stitch Width? No Problem! Simply press the Stitch Width Adjustment Button and use the +/- buttons to easily increase or decrease the Stitch Length.

Easily Change Stitch Length

Want to override the pre-set Stitch Length? No Problem! Simply press the Stitch Length Adjustment Button and use the +/- buttons to easily increase or decrease the Stitch Length.

Built-In Alpha-Numeric Stitches

The Janome 8200QCP has Built-In Letter and Number Stitches allowing you to sew quilt labels and more with your sewing machine. Upper-Case, Lower-Case, Numbers and Punctuation is all built into the machine as well as a 9mm Monogram Font!

Easy-To-Use Control Panel

The Easy-to-Use Control Panel makes sewing a cinch. Press the Mode Button to switch the mode to either Regular Stitch Selection or Alpha-Numeric Stitch Selection. The Width and Length +/- Buttons increase or decrease the Stitch Length or Width. The Memory Button will memorize the stitch you are on to combine stitches. Press the Clear Button to delete the last stitch put into memory. Up to 50 Stitches can be memorized! Use the Number Key to type in the desired stitch you would like to sew! The Direct Pattern Selection Buttons at the bottom of the control panel will automatically set the sewing machine to one of four stitches with the push of a button.

Quick Flip-Up Stitch Chart

Located at the top of the machine is a convenient flip-up stitch panel that shows you all of the Built-In Stitches at a glance. It also tells you the corresponding stitch number that goes along with the sewing stitch that you have chosen. Lifting the top also exposes Sewing Foot Storage, the bobbin winder, the thread spool, thread tension and adjustable presser foot pressure dial.

Handy Function Buttons

The Handy Function Button Panel is extremely easy to use and provides the user with variety of functions. The Thread Cutter Button will cut the the top thread and bobbin thread with the touch of a button. The Reverse Button allows your machine to sew in reverse to reinforce stitching. The Lock Stitch Button finishes the stitch you are on so you do not finish with half a pattern and the Needle Up/Down brings your needle either up or down with the touch of a button. You can also use the Needle Up/Down Button to set your needle in the down position every time you finish a seam so you can easily pivot on your work. The Start/Stop button allows you to sew without using the foot control and if you press it and hold it down, it will sew very slowly; so you can be as exact as you want.

Automatic Tension

Forget about bad tension, it’s a thing of the past with auto-tension. Just place your material under the foot and sew; the machine will do the rest for you!

Auto-Declutch Bobbinwinder

No more fighting with old handwheels that won’t release! Just push the bobbinwinder to the right and the auto-declutch will automatically stop the needle from moving!

Adjustable Presser Foot Pressure

Occasionally bulky layers of fabric require additional pressure from the foot; sheer fabrics need less. The Janome 8200QCP lets you control precisely how firmly the foot is pressing on your fabric. There are 7 different settings so you can find the right setting for your material and get the same outcome every single time.

Extra-Long Free-Arm

Want to sew on Shirt Sleeves or Pants? No problem, simply remove the Free Arm and by sliding it to the left and you are ready to sew. The Janome 8200QCP has an Extra-Long Free Arm which is a Foot-Long, giving you ample space for anything needing a seam or project that needs doing.

Plenty Of Accessory Storage

The Free Arm Table has Double Accessory Bins located at both the front and rear end. Store your sewing feet, bobbins, needles and more with the machine at all times. Have all accessories on hand without taking up any extra space!